![]() |
|

| Long Panel | | | Short Panel | | | Non Insulated | | | Insulated | | | Color Options |
| Window Options | | | Framing-Molding | | | 10 Ball Rollers | | | Low Headroom | | | Areas Served |
| Sectional Long Panel Design | |
![]() |
![]() Long Panel models : |
| Sectional Short Panel Design | |
![]() |
![]() Short Panel models : |
| DoorTech Non-Insulated Avalon, Delmar | |
![]() |
DoorTech Avalon Raised Long Panel DoorTech Delmar Raised Short Panel
|
| PRICE INFORMATION : Standard installation includes hardware, springs, fasteners, haul-away-old-door. | ||||||||||
| Standard Height 7'- 0" | 8 X 7 | 9 X 7 | 10 X 7 | 12 X 7 | 14 X 7 | 15 X 7 | 16 X 7 | 18 X 7 | Oversize up to 8'0" Single: Double: * | Additional ** |
| DoorTech Avalon Long Panel | $625.95 | $649.95 | $659.95 | $679.95 | $699.95 | $725.95 | $749.95 | $999.95 | +$75.00 +$150.00 | ? |
| DoorTech Delmar Short Panel | $625.95 | $649.95 | $659.95 | $679.95 | $699.95 | $725.95 | $749.95 | $999.95 | +$75.00 +$150.00 | ? |
| For odd widths, use door prices set at the next wider door size, plus an additional $50.00 cut down charge. |
| *Doors with oversize height at a width of over 12' wide are subject to the higher $150.00 charge. |
| ** If needed, additional charges will apply to low headroom tracks, hardware and framing. |
| Options such as stop-molding, windows are available at additional cost. |
| 10 ball rollers are included at no additional cost. |
| DoorTech Catalina Tahoe Insulated | |
![]() |
DoorTech Catalina Raised Long Panel DoorTech Tahoe Raised Short Panel
|
| PRICE INFORMATION : Standard installation includes hardware, springs, fasteners, haul-away-old-door. | ||||||||||
| Standard Height 7'- 0" | 8 X 7 | 9 X 7 | 10 X 7 | 12 X 7 | 14 X 7 | 15 X 7 | 16 X 7 | 18 X 7 | Oversize up to 8'0" Single: Double:* | Additional ** |
| DoorTech Catalina Long Panel | $799.95 | $859.95 | $899.95 | $959.95 | $979.95 | $999.95 | $1059.95 | $1299.95 | +$100.00 +$200.00 | ? |
| DoorTech Tahoe Short Panel | $799.95 | $859.95 | $899.95 | $959.95 | $979.95 | $999.95 | $1059.95 | $1299.95 | +$100.00 +$200.00 | ? |
| For odd widths, use door prices set at the next wider door size, plus an additional $50.00 cut down charge. |
| *Doors with oversize height at a width of over 12' wide are subject to the higher $200.00 charge. |
| ** If needed, additional charges will apply to low headroom tracks, hardware and framing. |
| Options such as stop-molding, windows are available at additional cost. |
| 10 ball rollers are included at no additional cost. |
| Colors Options | ![]() White | ![]() Almond |
![]() Brown |
| Window Options - Raised Short Panel | ![]() Sunburst | ![]() Sunburst |
![]() Diamond | ![]() Sherwood | |
![]() Cathedral | ![]() Ruston | |
![]() Mission | ![]() Stockton | |
![]() Plain Lite | PlainLite available for Long Panel (not shown). | |
| Window Options - Raised Long Panel | ||
![]() Mission | ![]() Stockton | |
![]() Full Sunburst | ![]() Diamond | |
![]() Cathedral | Catherdral available for Short Panel (not shown). | |
| WINDOW PRICE INFORMATION : Single, Intermediate and Double widths in feet. | ||
| SINGLE: Width: 8', 9', 10' Price: $150.00 | INTERMEDIATE: Width: 12', 14' Price: $175.00 |
DOUBLE: Width: 15', 16', 18' Price: $250.00 |
| Framing | Stop Molding |
![]() Jambs, header and kingstuds need to be flush around the backside perimeter, by shimming, framing or ripping jambs to size. (see diagram) for details. Single Openings: $95.00 Double Openings: $135.00 Note: Framing may not be required, depending on how the garage opening is constructed. |
![]() Seals the top and sides of the door from the outside elements. Also provides a nice exterior finish. Colors available: white, almond and brown. Single Openings: $50.00 Double Openings: $75.00 |
| 10 Ball Rollers | Low Headroom |
![]() High quality, provides quiet, smooth operation. Nylon roller and hardend steel stem. Tested for 15,000 cycles of operation. Better than black polymer non-bearing rollers. 2" Outer Diameter Standard with DoorTech Doors. |
![]() The minimum clearance for standard hardware and tracks is normally 15" from the ceilings lowest point the bottom of the header. If this criteria is not met, low headroom hardware will be required. 0", 3", 6" Low Headroom Kits: $95.00 |
| Installation available for the following Southern California areas: The FOOTHILLS, Pasadena, Altadena, San Gabriel Valley, Monrovia, Arcadia, Sierra Madre, San Marino, Glendale, Burbank, Glendora, Temple City, San Dimas, La Verne, La Canada, La Cresenta, Montrose and some Los Angeles areas of Southern California. To contact us call: (626) 794-1165 or click here. |